I'm setting up a 4 probe EGT system for a Rotax 912ULS. The display electronics require UNGROUNDED probes, which are a little less common. Two possible types are:
1) Aerospace Logic http://www.aerospacelogic.com/index.php ... uct_id=200
or
2) Electronics International https://www.aircraftspruce.com/catalog/ ... kkey=22203
Any recommendations, suggestions or comments?
Thanks, Pete
EGT probes for Rotax 912ULS?
Moderator: drseti
Re: EGT probes for Rotax 912ULS?
Pete, all I've ever used are grounded probes. They work with all the analog gauges and glass panels I've ever seen. I'm curious what kind of display requires ungrounded.
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Re: EGT probes for Rotax 912ULS?
I believe the EI and Aerospace Logic graphic displays want ungrounded probes. Also, the very easy to use thermocouple chips (MAX31850) need them.
Pete
Pete
Re: EGT probes for Rotax 912ULS?
The Avmap Engibox for Rotax engines needs ungrounded probes.
Type47
LSRI
INTJ
2006 Tecnam P92 Echo Super
Don’t do the thing that almost killed you until you at least get the staples taken out of your head first….
LSRI
INTJ
2006 Tecnam P92 Echo Super
Don’t do the thing that almost killed you until you at least get the staples taken out of your head first….