? 2 speed automatic geerbox

Are you building/buying/flying an Experimental Amateur-Built (E-AB) or Experimental Light Sport (E-LSA) aircraft? Converting an S-LSA to E-LSA? Changing or adding equipment, or otherwise modifying an S-LSA? Need help with Letters of Authorization? Or maybe designing your own aircraft? This forum is the place to discuss All Things Experimental.

Moderator: drseti

ScottyB
Posts: 19
Joined: Sun Mar 18, 2018 11:20 am

? 2 speed automatic geerbox

Postby ScottyB » Sun Jan 13, 2019 1:17 am

Light sport aircraft are limited to ground ajustable propeller but....... If there was a 2 speed transmission with a governor to keep prop speed around 2700 rpm
In low gear with a ground adjustable prop over piched you could run up to Max rpmand have power to spare
Once up to air speed your automatic transmission would shift to high gear letting you back off on the throttle or cruise at 139 miles an hour
Transmission like this could be built to be about 25-30 lbs and remove your gear box that is from 21- to 40 lbs just a thought

User avatar
bryancobb
Posts: 435
Joined: Tue Jun 02, 2009 12:35 pm
Location: Cartersville Georgia

Re: ? 2 speed automatic geerbox

Postby bryancobb » Sun Jan 13, 2019 3:57 am

In the mid 90's, I went to Sun-N-Fun and there was a WWI-type Experimental that had a Harley engine on it.
The builder chose to install the gearbox too. He would takeoff in low gear and climb steeply. Then he'd reduce his angle of climb and shift.
He changed gears 2 or 3 times in the same fashion as he gained altitude.

It was hilarious.
Bryan Cobb
Sport Pilot CFI
Commercial/Instrument Airplane
Commercial Rotorcraft Helicopter
Manufacturing Engineer II, Meggitt Airframe Systems, Fuel Systems & Composites Group
Cartersville, Ga
bryandcobb@att.net

User avatar
drseti
Posts: 6161
Joined: Sat Nov 28, 2009 6:42 pm
Location: Lock Haven PA
Contact:

Re: ? 2 speed automatic geerbox

Postby drseti » Sun Jan 13, 2019 9:19 am

ScottyB wrote:Transmission like this could be built to be about 25-30 lbs and remove your gear box that is from 21- to 40 lbs just a thought


Scotty, I don't doubt that a variable transmission could be produced at 25-30 pounds, but you've been misinformed about the weight of what it would replace. The existing Rotax 912 series gearbox weighs in at around 9 pounds. The extra weight would be significant - but more important, with up to 20 more pounds right in the nose, thus would raise havoc with CG!

Nice concept though. ;)
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
fly@AvSport.org
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US


Return to “Experimenter's Corner”

Who is online

Users browsing this forum: No registered users and 2 guests