Rotax Service Class Oct. 6 & 7, 2018 in Tucson, AZ

Constructive topics of interest related to aviation that do not match the other section descriptions below (as long as it is somewhat related to aviation, flying, learning to fly, sport pilot, light sport aircraft, etc.). Please, advertisements for Viagra will be promptly deleted!"

Moderator: drseti

roger lee
Posts: 751
Joined: Tue Dec 08, 2009 11:47 am
Location: Tucson, Az. Ryan Airfield (KRYN)

Rotax Service Class Oct. 6 & 7, 2018 in Tucson, AZ

Postby roger lee » Sat Jun 16, 2018 8:51 am

Note*** When you call California Power Systems to sign up make sure you tell them it is for the Tucson, AZ class in October so it isn't confused with some other class..


New Rotax 912UL/ULS & 912iS Service Class
Conducted by Rotax Instructor Roger Lee in Tucson, AZ
In conjunction with California Power Systems
Come join us for a new and exciting Service class.

Lots of hands on so don't miss it!

http://www.cps-parts.com/catalog/rtxpag ... pclass.php

Oct. 6th & 7th, 2018
(Saturday & Sunday)

This class is a must for an Owner, LSRM or an A&P mechanic to develop their 912 series inspection skills and knowledge.
This class will focus on a hands on approach to completing a 100 hour / annual condition inspection. The class will differ from other Service rated classes as it will spend less classroom time and a lot of hands on time with a live engine performing a 100 hour / Annual Condition Inspection. You will be able to ask on the spot questions and solve problems on the live engine while developing and expanding your 912 inspection skills and knowledge base. We will have classroom in the morning Saturday and Sunday (Oct. 6th & 7th) and spend both afternoons doing an annual inspection on an in-service and operational 912 engine. The afternoons will be spent in the hangar and everyone will be turning wrenches and performing task. You WILL understand a carb sync at the end of this class. We will have the Maintenance manual out and will follow the inspection procedures. At the end of this class you should be well grounded in the performance of a 100 hour / annual condition inspection. You will receive a Rotax Service certificate for successful completion of this class.
Our classroom is air conditioned and comfortable. Maximum student limit of 10. The class size is limited to make sure everyone gets to participate so don’t procrastinate and sign up now. Class times will be 8 a.m. to 5 p.m.
Fly into Tucson International Airport (TIA) or fly your own plane into Ryan Airfield. Classes are Saturday and Sunday. All rental cars are on site at Tucson International Airport or Enterprise will pick you up if you fly into Ryan Airfield. Several hotels are just hundreds of yards down the street at TIA. Ryan Airport (KRYN) is only 10-12 minute drive. The entire experience is convenient and comfortable.
For additional information or to sign up call Brain Toepfer at CPS in CA at 951-549-7786 ext. 302 or email bryantoepfer@cps-parts.com. For additional class details call Roger Lee in Tucson, AZ at 520-574-1080.

CLASS OVERVIEW:
This is a two day 16 hour class that qualifies graduates to maintain 912 series engines under ASTM standards as set forth by the Light Sport Aircraft (LSA) regulations. Passing a written exam is required for Rotax certification and graduates will be issued an IRMT (Independent Rotax Maintenance Technician) badge and service number valid for two years.
This course will supply attendees with the following information and skills:
· Rotax History and Product Familiarization
· Senders and Instrumentation
· Gearbox : The internal workings and maintenance
· Propeller considerations, adjustment and its effects on your engine
· Hose inspection, maintenance and considerations
· Oil System workings, maintenance and considerations
· Cooling System workings, maintenance and considerations
· Fuel System workings, maintenance and considerations
· Carburetor workings, maintenance and keeping them in sync
· Ignition Theory
· Compression and why it’s important, what it tells us and performance of a real compression test
· Troubleshooting
· Scheduled Maintenance
· Maintenance Documentation

MATERIALS:
All tools, reading materials, and supplies will be provided, however you should bring a laptop or tablet to view the manuals or do any research. A free WIFI connection is available in the classroom.


http://www.cps-parts.com/catalog/rtxpag ... pclass.php
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)

User avatar
drseti
Posts: 5896
Joined: Sat Nov 28, 2009 6:42 pm
Location: Lock Haven PA
Contact:

Re: Rotax Service Class Oct. 6 & 7, 2018 in Tucson, AZ

Postby drseti » Sat Jun 16, 2018 12:26 pm

Too bad the photo in the CPS link shows Eric Tucker teaching the class, instead of Roger Lee. You should get a new picture taken during the next Tucson class, and send it to them...
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
fly@AvSport.org
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US

roger lee
Posts: 751
Joined: Tue Dec 08, 2009 11:47 am
Location: Tucson, Az. Ryan Airfield (KRYN)

Re: Rotax Service Class Oct. 6 & 7, 2018 in Tucson, AZ

Postby roger lee » Sat Jun 16, 2018 2:26 pm

We're twins. LOL
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)

User avatar
drseti
Posts: 5896
Joined: Sat Nov 28, 2009 6:42 pm
Location: Lock Haven PA
Contact:

Re: Rotax Service Class Oct. 6 & 7, 2018 in Tucson, AZ

Postby drseti » Sat Jun 16, 2018 3:18 pm

A couple of good-looking guys. But Eric has an edge, being Canadian.
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
fly@AvSport.org
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US

roger lee
Posts: 751
Joined: Tue Dec 08, 2009 11:47 am
Location: Tucson, Az. Ryan Airfield (KRYN)

Re: Rotax Service Class Oct. 6 & 7, 2018 in Tucson, AZ

Postby roger lee » Thu Aug 02, 2018 2:04 pm

Time is growing short and seats are getting on short supply. Good hands on for completing and understanding annuals. Make sure you tell CPS this is the Tucson, AZ class.



http://www.cps-parts.com/catalog/rtxpag ... pclass.php
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)

roger lee
Posts: 751
Joined: Tue Dec 08, 2009 11:47 am
Location: Tucson, Az. Ryan Airfield (KRYN)

Re: Rotax Service Class Oct. 6 & 7, 2018 in Tucson, AZ

Postby roger lee » Thu Sep 06, 2018 9:13 am

4 weeks to go and seats are in short supply. Good hands on for completing and understanding annuals. Make sure you tell CPS this is the Tucson, AZ class.

http://www.cps-parts.com/catalog/rtxpag ... pclass.php
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)

roger lee
Posts: 751
Joined: Tue Dec 08, 2009 11:47 am
Location: Tucson, Az. Ryan Airfield (KRYN)

Re: Rotax Service Class Oct. 6 & 7, 2018 in Tucson, AZ

Postby roger lee » Tue Sep 25, 2018 2:28 pm

Rotax Oct. 6th & 7th Class Directions

Fly into Tucson International Airport (TIA) or fly your own plane into Ryan Airfield. Classes are Saturday and Sunday. All rental cars are on site at Tucson International Airport or Enterprise will pick you up if you fly into Ryan Airfield. Several hotels are just hundreds of yards down the street at TIA. Ryan Airport (KRYN) is only 10-12 minute drive. The entire experience is convenient and comfortable.

The class is Oct. 6th & 7th, Saturday & Sunday. The class will start promptly at 0800 each day and plan on staying until 1700 hours. There will be class in the conference room each day in the morning and work in the hangar each day after the class presentation. There will be a lunch break each day at approximately 1130 hours.
Please bring a laptop or tablet device in case you need to find Rotax information or manuals on line. There is Wi-Fi in the classroom.
The class is being held at Ryan Airfield (KRYN) in Tucson, AZ. (9698 W Ajo Hwy). This is west of Tucson proper and city limits and approximately 12 minute drive from the Tucson Airport (TIA). If you fly in your own aircraft parking is right up at the back door of the conference room. Rental cars are available at Tucson Airport and Enterprise usually will pick you up at Ryan if you need a car from there.

Directions to Ryan Airfield are as follows and can be reached by either Ajo Hwy or Valencia Rd. They both run right in front of Ryan Airport. The conference room is up front at the airport on Ajo Hwy. It is the only building out on Ajo Hwy and the only parking out on Ajo Hwy.

General Directions:
If you are staying in Tucson central or out by Interstate 10 then take I-10 to I-19 south. The turn right to go west bound on Ajo Hwy. Follow this road 12 miles out to Ryan Airfield.
If you are staying in a hotel out by Tucson Airport off Valencia Rd. Just head west on Valencia until it dead ends right at Ryan Airfield on Ajo Hwy.

There is a restaurant at Ryan field and you can have breakfast there. They open at 0600. Lunch is either at Ryan or at two other local restaurants.

Prepare to learn and have fun doing it!

For questions call Roger Lee in Tucson, Az at 520-574-1080 Home or 520-349-7056 cell or Bryan Toepfer at California Power Systems 505-550-8121.
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)


Return to “Hangar Talk”

Who is online

Users browsing this forum: No registered users and 5 guests