Sling 2 build / Midwest Sky Sports

Talk about airplanes! At last count, there are 39 (and growing) FAA certificated S-LSA (special light sport aircraft). These are factory-built ready to fly airplanes. If you can't afford a factory-built LSA, consider buying an E-LSA kit (experimental LSA - up to 99% complete).

Moderator: drseti

User avatar
HornedFrogGrant
Posts: 68
Joined: Sun Mar 04, 2018 6:08 pm
Location: Grapevine, TX

Re: Sling 2 build / Midwest Sky Sports

Post by HornedFrogGrant »

FastEddieB wrote:I suspect a lot of us will be living the dream vicariously through you!
I know I am. Watching this progress is fascinating. 8)
Grant
Sport Pilot - ASEL
cam737
Posts: 136
Joined: Mon Jan 22, 2018 3:10 pm

Re: Sling 2 build / Midwest Sky Sports

Post by cam737 »

Thanks HornedFrogG! It has been a great experience so far...learning so much.

A few posts back I wrote that the Garmin navigator is the GTNxxx?...it is the Garmin GTN625 which cost me about $5,500 with the purchase of a G3X.

Steve and Adam at Midwest Sky Sports are extremely well versed on this stuff.

Here is a pic of the stick grips in the Patriotic LSA Sling that Midwest Sky Sports just built and is flying to Oshkosh. These are the same grips I am putting into my Sling. They are laser etched!
Sling2_1.jpeg
Sling2_1.jpeg (80.81 KiB) Viewed 14574 times
cam737
Sling 2 Build
[email protected]

swa
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Sling 2 build / Midwest Sky Sports

Post by Warmi »

These sticks look like you could manage a few rocket launchers and some laser cannons with them ...in addition to the usual stuff to manage in a LSA...heh
Flying Sting S4 ( N184WA ) out of Illinois
User avatar
ShawnM
Posts: 813
Joined: Sat Nov 11, 2017 9:59 pm
Location: Clearwater, FL / KZPH

Re: Sling 2 build / Midwest Sky Sports

Post by ShawnM »

They are cool, and EXTREMELY versatile. There is a company called Infinity Aerospace that sells military style stick grips with too many switch configurations to count. Cost is $200. They are available for left and right handed people. I had these in an experimental helicopter I used to own.

http://infinityaerospace.com/product/fe ... ick-grips/
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Sling 2 build / Midwest Sky Sports

Post by Warmi »

They do look cool indeed but I have no use for them. I really prefer manual trim, which in Stings is like a small throttle, and flaps are used on landings only anyway so a simple stick with PTT is all I need ...
Flying Sting S4 ( N184WA ) out of Illinois
Wm.Ince
Posts: 1080
Joined: Sun Nov 17, 2013 3:27 pm
Location: Clearwater, FL

Re: Sling 2 build / Midwest Sky Sports

Post by Wm.Ince »

Warmi wrote: . . . I really prefer manual trim . . . so a simple stick with PTT is all I need ...
To each his own.
Electric elevator trim is ideal. Not only activated from the contol sticks, but also activated when the autopilot is coupled. A lot less fatigue, especially during configuring for speed, climb, decents and flaps. It is not appreciated until it is regularily used. It can easily "spoil" you. . . :D
Bill Ince
LSRI
Retired Heavy Equipment Operator
Sling 2 Pilot
Posts: 317
Joined: Wed Jan 17, 2018 4:53 pm

Re: Sling 2 build / Midwest Sky Sports

Post by Sling 2 Pilot »

I chose Tosten grips for my Sling, love em. They and the Infinity’s are far better when managing trim, rather than the stock grips with the push buttons on top.
Attachments
903096C1-2394-416F-8329-3E984795AB1B.jpeg
903096C1-2394-416F-8329-3E984795AB1B.jpeg (136.18 KiB) Viewed 14550 times
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Sling 2 build / Midwest Sky Sports

Post by Warmi »

Wm.Ince wrote:
Warmi wrote: . . . I really prefer manual trim . . . so a simple stick with PTT is all I need ...
To each his own.
Electric elevator trim is ideal. Not only activated from the contol sticks, but also activated when the autopilot is coupled. A lot less fatigue, especially during configuring for speed, climb, decents and flaps. It is not appreciated until it is regularily used. It can easily "spoil" you. . . :D
The one I used in Remos , which I think was the standard Allen design, was just awful... it was like operating slow machinery with delayed feedback response ... very frustrating.
Once I tried the manual design in Sting .... this is so much simpler and with direct instant feedback, I am not going back.
Like you said, to each it’s own.

Actually , to clarify , my problem is not with having trim adjustment controls on the stick but rather with electrically powered trims , regardless where these are located , they are just too slow to adjust and the effect is similar to adjusting volume with up/down controls on your iPhone vs knob based analog adjustment. Give the analog control every time ....
Flying Sting S4 ( N184WA ) out of Illinois
User avatar
FastEddieB
Posts: 2880
Joined: Wed Jan 07, 2009 9:33 pm
Location: Lenoir City, TN/Mineral Bluff, GA

Re: Sling 2 build / Midwest Sky Sports

Post by FastEddieB »

Electric trims are not necessarily slow.

In fact, the main complaint in the Cirrus is that they’re too fast!

In my Sky Arrow the speed and button location on the sidestick are perfect. But I’ve had intermittent problems, which is extremely aggravating. Those times I long for at least a manual backup.
Fast Eddie B.
Sky Arrow 600 E-LSA • N467SA
CFI, CFII, CFIME
[email protected]
User avatar
ShawnM
Posts: 813
Joined: Sat Nov 11, 2017 9:59 pm
Location: Clearwater, FL / KZPH

Re: Sling 2 build / Midwest Sky Sports

Post by ShawnM »

Warmi wrote:Actually , to clarify , my problem is not with having trim adjustment controls on the stick but rather with electrically powered trims , regardless where these are located , they are just too slow to adjust and the effect is similar to adjusting volume with up/down controls on your iPhone vs knob based analog adjustment. Give the analog control every time ....
Eddie is right, they are not necessarily slow. Depends on the aircraft and if they have a speed controller limiting the trim motors. The electric trim in my early SportCruiser is so fast I have to simply tap the buttons to adjust the trim. The later SportCruisers added a motor speed controller to slow down the trim motors as many thought it was too fast.

Trim speed depends on the plane and how it's wired. You can even add your own adjustable PWM voltage controller that will allow you to set the trim speed at whatever you like, fast, slow and anywhere in between. All for under $10.

And as Wm.Ince stated, it'll spoil you for sure. :mrgreen:
Last edited by ShawnM on Sun Jul 22, 2018 6:33 pm, edited 1 time in total.
User avatar
ShawnM
Posts: 813
Joined: Sat Nov 11, 2017 9:59 pm
Location: Clearwater, FL / KZPH

Re: Sling 2 build / Midwest Sky Sports

Post by ShawnM »

On that same note the NEW Ray Allen G407 version stick grips now have the 4 way high hat for trim, they are very nice stick grips.

I agree that the 4 separate and individual buttons on the Ray Allen G205 is not ideal but is better than manual trim. :mrgreen: The G205 is standard in the SportCruiser.
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Sling 2 build / Midwest Sky Sports

Post by Warmi »

Since people are posting their panels.. why don’t you post yours Shawn ... I am just curious and I am always up for some good panel porn ... :D
Flying Sting S4 ( N184WA ) out of Illinois
User avatar
ShawnM
Posts: 813
Joined: Sat Nov 11, 2017 9:59 pm
Location: Clearwater, FL / KZPH

Re: Sling 2 build / Midwest Sky Sports

Post by ShawnM »

Warmi wrote:Since people are posting their panels.. why don’t you post yours Shawn ... I am just curious and I am always up for some good panel porn ... :D
It's not the panel porn you're expecting, remember I have a 2007 SportCruiser with the older, legacy Dynon glass. Compared to the latest carbon fiber panels out there stuffed with the large Skyview or Garmin instruments it may come up short in your expectations. For me, I love what I have now after my recent GPS and COMM radio upgrade. I may think about upgrading in the future but as I said, for now my panel provides me everything I need.

I have new panels drawn up in CAD that I'll eventually look into having made when it's time for an upgrade.

For now, this is all I have to offer......
left panel.jpg
left panel.jpg (60.29 KiB) Viewed 14506 times
right panel.jpg
right panel.jpg (64.94 KiB) Viewed 14506 times
User avatar
ShawnM
Posts: 813
Joined: Sat Nov 11, 2017 9:59 pm
Location: Clearwater, FL / KZPH

Re: Sling 2 build / Midwest Sky Sports

Post by ShawnM »

Warmi wrote:Since people are posting their panels......
Since I showed you mine you have to show me yours. :mrgreen:

Isn't that how it works?
User avatar
Warmi
Posts: 1230
Joined: Sun Oct 16, 2016 5:35 pm
Location: Frankfort, IL

Re: Sling 2 build / Midwest Sky Sports

Post by Warmi »

Actually, to me "panel porn" doesn't mean the latest and greatest in avionics but rather the overall aesthetics i.e a Cub with 2 analog gauges and few other items can looks awesome :-)
The latest Sling 2 planes from MSS look so awesome not because they sport dual Garmins but because the fit and finish of the panels is superb and the placement of instruments is logical and the whole thing is just very pleasing - I know it is only aesthetics but damn, we are paying tons of money for these things so why not demand quality panels as well :-)

But in your case, you do have the latest Garmin 660 and GTR 225 - can't get much better than that. The legacy Dynons , the EFIS is pretty much all you need for regular flying and the EMS is really good - I wish i had this sort of EMS on my panel.
One question does Dynon EMS allow you to record engine data ?
Another question - with GRT 225 , can you tune frequencies directly from your GPS or do you have to do it manually ?

Overall, between Garmin AP, EFIS/EMS and their GPS/Comms you got pretty much 90% of what is provided by the latest EFIS installations ( Garmin or Dynon )

My plane was built in 2012 but my panel is actually less technologically advanced than yours ( meaning .. I have more analog gauges :-)
But , just as you, I have an EFIS, a modern GPS and TruTrak two axis autopilot integrated with EFIS/GPS, ADSB IN and out (GDL 82) - upgrading this to Garmin or Dynon would mean getting rid of pretty much all my existing, perfectly good, avionics to get additional 10% capabilities at a cost of about 20 K or so ... hmm ?

The only issue with my EFIS is that is no longer being produced or supported which means, if it goes, I will have replace it with something else ... but the way I see it, I will most likely replace it with one of Grand Rapid Technologies EFISs since it can support all my existing stuff (AP,comms,transponder etc)
The only thing I am currently missing is some capability to record engine data and to automatically tune my radio based on GPS selections – the gps (796) does support this functionality, but it uses a serial connection for this and both of my serial ports are already allocated ( 796 -> EFIS, 796 -> ELT )

Anyway, here is my panel ..
panel.jpeg
panel.jpeg (242.64 KiB) Viewed 14491 times
Flying Sting S4 ( N184WA ) out of Illinois
Post Reply