Sky Arrow Annual
Posted: Thu Apr 21, 2016 8:57 am
My Annual Condition Inspection is due by the end of the month. I usually begin it towards the very end of the month to push the renewal date forward a month each time - I have managed to move it to late April - much nicer than when I was shivering my butt off doing them in the depths of N GA winter. The entire process typically takes about 4 or 5 days, working about 4 or 5 hours at a time.
In any case, I'm going to start in a week or so, probably next Friday/Saturday. Much of the stuff is ROTAX-related, and I usually begin with a lot of that: Oil and filter change, oil filter opening and inspection, friction check, plug inspection/cleaning or, in this case, change, float bowl inspection, compression check, carb balance, that sort of thing.
If anyone in the area wants to get "educated" on any of this, feel free to come by Copperhill to observe/help.
Let me know...
In any case, I'm going to start in a week or so, probably next Friday/Saturday. Much of the stuff is ROTAX-related, and I usually begin with a lot of that: Oil and filter change, oil filter opening and inspection, friction check, plug inspection/cleaning or, in this case, change, float bowl inspection, compression check, carb balance, that sort of thing.
If anyone in the area wants to get "educated" on any of this, feel free to come by Copperhill to observe/help.
Let me know...