FYI,
Here is new service info for the new software version for BUDS for the IS engine. This one will only affect about 10-12 people in the US.
http://legacy.rotaxowner.com/si_tb_info ... -003r2.pdf
Here is new service info for the Teflon fuel lines that feed the carbs if you have them. No longer on the 5 year replacement program.
http://legacy.rotaxowner.com/si_tb_info ... 12-022.pdf
New Rotax service info releases
Moderator: drseti
New Rotax service info releases
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)
Re: New Rotax service info releases
Roger, I just got that SI. I wonder if this means I can replace rubber fuel hoses with the teflon ones when an engine comes in for the 5 year service, and then they're good for the life of the engine?
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Re: New Rotax service info releases
Hi Paul,
Yes you could, but a Sport Cruiser (you do have a Sport Cruiser, right?) doesn't have the fuel assembly block on the cross over tube that uses the banjo bolt setup.
Yes you could, but a Sport Cruiser (you do have a Sport Cruiser, right?) doesn't have the fuel assembly block on the cross over tube that uses the banjo bolt setup.
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)
Re: New Rotax service info releases
actually, Roger, it's a SportStar, but you're right about the lack of the fuel assembly block.
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Re: New Rotax service info releases
The hoses on top of the engine would be included for the majority of the owners right now, but if you have a fairly new engine with the new style pump from the factory then it also has Teflon hoses. This won't affect most of us because we don't have that new of an engine.
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)
Re: New Rotax service info releases
Roger, Paul,
Have you guys purchased the B.U.D.S. Set Level 3 (part 864023) as is required by sb-912i-002 ?
I don't even see it listed at California Power Systems, they have Levels 1 & 2.
Looks like a pricey connector (at least Level 2 is,) but will be required at annual and for this and further updates, no?
thanks,
Craig
Have you guys purchased the B.U.D.S. Set Level 3 (part 864023) as is required by sb-912i-002 ?
I don't even see it listed at California Power Systems, they have Levels 1 & 2.
Looks like a pricey connector (at least Level 2 is,) but will be required at annual and for this and further updates, no?
thanks,
Craig
Re: New Rotax service info releases
Hasn't come up for me yet, Craig, as none of my maintenance customers flies an iS. But, I'm sure I'm going to have to address this eventually.
The opinions posted are those of one CFI, and do not necessarily represent the FAA or its lawyers.
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Prof H Paul Shuch
PhD CFII DPE LSRM-A/GL/WS/PPC iRMT
AvSport LLC, KLHV
[email protected]
AvSport.org
facebook.com/SportFlying
SportPilotExaminer.US
Re: New Rotax service info releases
Hi Craig,
Level 1-2 are for owners and mechanics. Level 3 is usually for distributors and they are $1087 and hard to come by. If you need an ECU flashed you will probably be taking it to a distributor. I am also available.
Level 1-2 are for owners and mechanics. Level 3 is usually for distributors and they are $1087 and hard to come by. If you need an ECU flashed you will probably be taking it to a distributor. I am also available.
Roger Lee
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)
Tucson, Az.
LSRM-A, Rotax Instructor & Rotax IRC
(520) 574-1080 (Home) Try Home First.
(520) 349-7056 (Cell)